Air Engineering High Performance Parts

Air End Rebuilding
Product Info
Quote Request
Shop Online
Head-to-head Tests
Tech Tips and Facts
About Air Engineering
Videos
Downloads
Press

For over 30 years, Air Engineering has been rebuilding airends from 5 to 500 horsepower for every brand of rotary screw compressor & vacuum pump.

Air Engineering provides an alternate option to the high cost of a factory airend exchange. 

 

• Remanufactured to Exacting Standards

• Engineered to Outperform Factory Exchange Units

• 1 or 2 Year Warranty on all Rebuilds

• Average Rebuild Time 5-7 Days

• Free Lubricant Analysis Included

• Replacement Drive Gear Sets

• Full-Service, In-House Machine Shop

• Sealing Strip Repair

• Dynamic Rotor Balancing

• Variable Speed Units

• Oil-Free Units including Atlas Copco® Z series

® Registered trademark of Atlas Copco Corporation

View Air End Rebuilding Pictures

View Air End Rebuilding Process

View Air End Warranties


Makes and Models:

Atlas Copco

  • GA 15-30 (15-30 HP and 134 mm)
  • GAU 407/409/507 (40-75 HP and 134 mm)
  • GAU 509/607/609 (40-75 HP and 134 mm)
  • GA 807/809/907 (100-200 HP and 220 mm)
  • GA 909/1107/1109 (100-200 HP and 220 mm)
  • GA 1407/1409 (100-200 HP and 220 mm)

Compair - Kellogg

  • KRS 15-30 (15-30 HP and 82 mm)
  • KRS 40-75 (40-75 HP and 127 mm)
  • KRS 100-200 (100-200 HP and 204 mm)
  • CRS 20EL-30EH (20-30 HP and 102 mm)
  • CRS 30/CRS 75 (40-75 HP and 127 mm)
  • CRS 100 (100 HP and 178 mm)
  • CRS 125 (125-200 HP)
  • 6060/6075 (60-75 HP and 204/150 mm)

Gardner Denver

  • BESD/BESE (15-40 HP and 121 mm)
  • BESF/BESG (15-40 HP and 121 mm)
  • BESH/EBE (15-40 HP and 121 mm)
  • ESG/ESH/ESI (30-50 HP and 153 mm)
  • ESK/ESL/ESM (60-100 HP and 175 mm)
  • ECH/HJ (40-50 HP and 177 mm)
  • ECM/KL (60-75 HP and 206 mm)
  • EAP-M (100 HP and 227 mm)
  • ESN/ESO/ESP (100-200 HP and 248 mm)
  • EAQN-O (100-200 HP and 248 mm)
  • EAU P-Q-R (200-300 HP and 296 mm)
  • ESQ ESR (200-300 HP and 321 mm)
  • ESS/EST/EAY (300-400 HP and 370 mm)

Ingersoll Rand

  • ESP-EP (3-15 HP)
  • ESP-EP (15-40 HP)
  • SP 15-50 (15-50 HP and 100 mm)
  • SSR EP 15-50 (15-50 HP and 100 mm)
  • SSR 100-150 (15-50 HP and 100 mm)
  • SSR 200-250H (50-75 HP HP and 127.5 mm)
  • SP 60 (50-75 HP and 127.5 mm)
  • SSR 60XF (50-75 HP and 127.5 mm)
  • SP 15-50 (15-50 HP and 127.5 mm)
  • PA 50-60 (50-75 HP and 127.5 mm)
  • PA 75-100 (75-100 HP and 163.2 mm)
  • SP 75-100 (75-100 HP and 178.5 mm)
  • SSR 75-100XF (75-100 HP and 178.5 mm)
  • SSR 300-500 (75-150 HP and 178.5 mm)
  • PA 75 (75-100 HP and 178.5 mm)
  • PA 100-150 (100-150 HP and 204 mm)
  • SSR 125-200XF (100-200 HP and 226 mm)
  • SSR 500-800 (100-200 HP and 226 mm)
  • PA 100-125 (100-200 HP and 226 mm)
  • SSR 350-450XF (350-450 HP and 304 mm)
  • SSR 1600-2850 (400-800 HP and 350 mm)
  • SSR 3000 (400-800 HP and 350 mm)

Joy

  • TA 007/TA 015 (7.5-15 HP and 72 mm)
  • TA 007/TA 015 (7.5-15 HP and 80 mm)
  • TA 007/TA 030 (20-30 HP and 100 mm)
  • TA 150 (40 HP and 108 mm)
  • TA 175/TA 290 (40-60 HP and 127.5 mm)
  • TA 300/TA 480 (75-100 HP and 163 mm)
  • TA 590/TA 750 (125-150 HP and 204 mm)
  • TA 975/TA 1000 (200 HP and 294 mm)
  • TA 1500/TA 1560 (250 HP and 307 mm)
  • TA 1550/TA 1560 (300-500 HP and 321 mm)
  • TA 2000/TA 2050 (450-500 HP and 356 mm)

Kaeser

  • SMB/SM11/SK18 (7.5-15 HP and 72 mm)
  • SK25/AS30/AS35 (20-40 HP and 105 mm)
  • BS44/BS50/BS60/
    CS75/CS90/CS120/DS140
    (40-100 HP and 160 mm)
  • DS170/DS200/
    ES300/FS360 (100-200 HP and 250 mm)
  • FS440/FS560/FS620 (220-475 HP and 346 mm) 

Leroi Dresser

  • 20SS-30SS (15-30 HP and 100 mm)
  • 20-60SSE (20-60 HP and 127 mm)
  • A20-A30SS (20-60 HP and 127 mm)
  • 20-30-SST (20-60 HP and 127 mm)
  • 40SS-75SS (40-75 HP and 175 mm)
  • 100SS-150SS (100-150 HP and 245 mm)
  • 200SS-300SS (200-300 HP and 309 mm)
  • D330-D365SS (75-150 HP and 175 mm)
  • D450-D48SS (75-150 HP and 175 mm)
  • D750SS (150-200 HP and 245 mm)

Quincy

  • QMB (10-30 HP)
  • QSB (15-40 HP and 127 mm)
  • QMA (50-75 HP and 127 mm)
  • QMA (100-150 HP and 204 mm)
  • QSI 25-30-40 (25-40 HP and 171 mm)
  • QSI 235-350 (50-100 HP and 204 mm)
  • QSI 490-740 (100-200 HP and 255 mm)
  • QSI 1000-1250-1500 (200-350 HP and 312 mm)

Sullair

  • 10 SERIES (25-40 HP and 108 mm)
  • 12 SERIES (40-60 HP and 127.5 mm)
  • 16 SERIES (60-75 HP and 163 mm)
  • 20 SERIES (100-150 HP and 204 mm)
  • 25 SERIES (150-200 HP and 255 mm)
  • 25S SERIES (200-350 HP and 255 mm)
  • 32 SERIES (200-450 HP and 321 mm)
  • *ES-6 (5-10 HP)
  • *ES-8 (15-30 HP)
  • *ES-11 (60-75 HP)
  • LS-16/12  2 STAGE (163/127.5 mm)
  • LS-20/12  2 STAGE (204/127.5 mm)
  • LS-20/16 (204/163 mm)
  • TS-20/12 (204/127 mm)
  • TS-16/12 (163/127 mm)
  • TS-20/16 (100-200 HP and 204/163 mm)
  • TS-32/25 2 STAGE (200-600 HP and 321/255 mm)

*Price includes airend rebuilding with filter, separators, motor bearing & seal.

 

 

 

Other Products:

Rotary Screw Compressor Parts Rotary Screw Compressor Parts
Lubricants Lubricants
Air End Rebuilding Air End Rebuilding
Reciprocating Compressor Parts Reciprocating Compressor Parts
Heat Exchangers Heat Exchangers
Coalescing Filters & Point of Use Filters Coalescing Filters Point of Use Filters

 

To order call our Parts Department at:

1.800.558.4318

1.262.478.0599

Fax number:

1.262.478.0701

Email address:

parts@airengineering.com

Visa, Mastercard, American Express

Copyright © 2006 Air Engineering, Inc. All Rights Reserved

Contact Us | Sitemap | Request A Quote | Disclaimer