FREE Laboratory Analysis
Air Engineering provides FREE laboratory analysis for current lubricant customers. Lubricant management is the most important task a compressor owner can do to prevent costly, unscheduled compressor failure. A thorough, consistent oil analysis program, performed by compressor experts, will allow you to manage the internal condition of your compressors.
Request an oil sample kit from Air Engineering. Complete chemical analysis of the lubricant sample is done at our state-of-the-art laboratory. A full report of chemical levels and any other relevant findings is provided at no cost to you.
Air Engineering also interprets the chemical analysis. Interpretation of the analysis is vital in maintaining your compressor in peak operating condition
Sample Lubricant Analysis Report
OIL ANALYSIS
Evaluation and Interpretation
With the emergence of long life synthetic lubricants, oil analysis is becoming an increasingly popular tool for monitoring the serviceability of the lubricant as well as foreshadowing developing problems. As synthetic lubricants are recommended for eight to ten times the life of petroleum lubricants, a good oil analysis program is a must for assuring that there is no contamination or degradation of the lubricant and that it can continue to function for the extended drain interval.
Key to Sources of Damaging Elements in Oil
Air Engineering's analysis program is designed to give your plant a competitive advantage. A complete overall view of the physical and chemical characteristics of the lubricant helps determine any significant lubricant deterioration as well as detect any machinery problems before they become serious and expensive to repair. These benefits can only be realized through proper evaluation and interpretation of analysis results. All the test results must be considered, along with the user's knowledge of his compressor's performance history, to correctly diagnose the condition of a given oil sample. Although there are given interpretations and recommendations on each lab report returned, it is very helpful for the end user to have a working knowledge of the tests involved and their significance.
VISCOSITY: The viscosity of a lubricant is monitored for significant increases or decreases from the original specification. A substantial decrease in viscosity could indicate a contamination of the lubricant causing a diluting effect. An increase in viscosity could also indicate a contamination or a degradation of the oil due to oxidation. A change of viscosity of more than 10% from the original specification usually indicates that the oil should be replaced.
TAN (TOTAL ACID NUMBER): The TAN of a lubricant measures the amount of acid and acid-acting constituents in the lubricant. This does not necessarily denote metal corroding materials as many chemicals and additives used in lubricants have an acid number.
Increases in TAN from the original specification usually indicates oil oxidation or corrosive acid contamination. A sudden increase in TAN can also indicate mechanical problems. An increase in TAN to greater than two (2) is significant in a compressor lubricant and would require the lubricant be changed.
WEAR METALS: In monitoring wear metals, it should be observed that the significant factor is not so much the amount of metals present as the rate of wear with respect to time. A sudden increase in wear metals usually indicates an incipient wear problem and machine inspection is highly recommended. A slow, constant increase in wear metals, however, can be considered normal for most equipment and no cause for alarm or required action. These metals will usually show in the form of iron, lead, copper, chromium, aluminum, nickel, silver or tin.
ADDITIVE METALS: Additive metals tend to remain fairly stable over the life of the lubricant but can fluctuate by 20 percent under normal circumstances. The emergence of an element which was not present in the original sample could indicate the addition of make-up oil whose additives differ from the original product. These metals are usually phosphorous, zinc, calcium, barium, molybdenum or antimony. Silicon is also used as an oil additive but can indicate the presence of dirt as well.
WATER CONTENT: The presence of water in a lubricant can decrease its lubricating effectiveness significantly; therefore, a lubricant should be monitored for percent water volume. The limit for water is virtually none and is typically measured down to 0.10.
Learn more about lubricant management: "Avoiding the Lubricant Death Spiral"TM
Other Products:
Rotary Screw Compressor Parts
Lubricants
Air End Rebuilding
Reciprocating Compressor Parts
Heat Exchangers
Coalescing Filters Point of Use Filters
