Keltec Technolab Dryer NON-CYCLING REFRIGERATED COMPRESSED AIR DRYER WITH INTEGRATED COMPRESSED AIR FILTERS
All dryers up to 1200 CFM include a one micron pre-filter and a .01 micron coalescing filter.
Download the Keltec Technolab brochure and spec sheet.
With a pressure drop of less than 3 psi, energy costs are greatly reduced.
DESIGNED FOR TROPICAL CONDITIONS
Keltec-Technolab air dryers can effectively operate with 140 F inlet temperatures, due to their use of R134A refrigerant across the dryer range, and through the use of an over sized condenser.
Every square inch inside the dryer is utilized.
DIGITAL INTERFACE CONTROLLER
With 8 temperature sensors, enabling complete system monitoring.
ALUMINUM PLATE HEAT EXCHANGER
Very Low Pressure Drop (2psi) Very Efficient (38 F real pressure dew point)
The scroll compressors used are energy efficient and resistant to liquid shock.
INTEGRATED DUAL FILTER SYSTEM
Which filters the compressed air to .01 micron
ELECTRICAL WIRES ARE SEPARATED FROM REFRIGERANT SIDE
There are no electrical wires inside the refrigerant side of the dryer. The electrical box has an external cover which has an access from the outside of the dryers. There is no need to open the dryer panels to enter the electrical box.
ALL WIRES INSERTED INTO PLASTIC CABLE HOLDERS
Wires connected to the electrical box with conduits
EXTRA BALL VALVES
Extra ball valves are brazed in to the refrigerant circuit in order to simplify parts replacement, without the chance of releasing refrigerant gas from the system.
Pressure switches are put in to the electrical box for easy access.
*All replacement parts are 100% guaranteed and designed to exact OEM specifications, offering equal to or better performance based on each manufacturer's stringent specifications.
Powered by MachineAssist.com